CSL Silicone Coatings and Sealants FAQ

Welcome to our silicone coatings FAQ. Here you will find answers on the CSL Silicones range that TSS supplies across Southern Africa, from corrosion and insulator coatings to roofs, joints and graffiti.

General silicone coatings FAQ

This general FAQ covers questions that apply across all our silicone coatings and sealants. For product detail, use the product FAQs above.

What are silicone coatings?

They are RTV silicone coatings that cure with moisture from the air. Once cured, they stay flexible and resist UV, salt and weathering far better than most paints. Also, our range covers corrosion, insulators, roofs and graffiti, plus a self levelling silicone joint sealant.

Why use silicone instead of paint or epoxy?

Paint and epoxy are rigid, and many organic coatings chalk in strong UV. Silicone, by contrast, moves with the surface and holds up under Southern African sun. As a result, assets go longer between maintenance cycles.

Do your coatings need blasting?

Not Si-COAT 579 CM. It goes onto steel cleaned with hand or power tools (SSPC SP2 or SP3) or water jetted to SSPC SP12 WJ-4. However, each product has its own prep, so check its FAQ or data sheet first.

How long do they last?

It depends on the product and the site. For example, 579 CM on Florida power plant piping showed no loss of thickness after about 20 years. Similarly, Si-COAT 570 HS has a service life of more than 15 years, and CSL 316 SL carries a 10 year warranty.

Can I see the test reports?

Yes, on request. For instance, Si-COAT 570 HS passed both IEC TR 62730 tests at independent accredited laboratories, and we send the full reports to engineers who ask. CSL test documents for the other products are also available from us.

Does TSS apply the coatings?

No. We supply the products and give technical support, while trained applicators do the work. In fact, CSL’s written product warranty applies only where TSS has trained the applicator.

Can homeowners buy from TSS?

Yes, but these are professional systems, not a quick fix from a hardware store. After all, they need proper surface preparation and application, and they come in trade pack sizes. So a homeowner usually works through an applicator.

Where do you supply, and how do I get a price?

Technical Solution Supplies distributes CSL Silicones products across Southern Africa, including the DRC and the Seychelles. For a price, request a quote with photos and a rough size.

See the proof

In the end, answers are only as good as the jobs behind them. So see our case studies, the Florida Fence Test results and the C5 coating system results. Also, if this silicone coatings FAQ didn’t answer your question, send it to us and we’ll add it.

Send us the problem

Photos and a rough size are enough to start, while drawings and specs can follow later. Then we come back with the right product and a quote.

Scroll to Top